A high-performance, water-based product developed for heavy-duty cutting and cutting on very hard, hard, and normal paints.

Made with micronized abrasives and a special emulsion with low dust emission, high lubrication, and no sticking to the wool pad.

Due to its high-tech formulation, it provides high performance and a fast process.
Its main features are:

When applied with a wool pad or aggressive foam, it provides efficient cutting on 1200-grit sanding and scratches of the same size, with the advantage of producing fewer pad marks, leaving the part cleaner and, in most cases, eliminating the refining (polishing) phase. It removes marks, scratches, and graininess (orange peel), producing a clean shine with low masking, facilitating operator visibility during scratch removal. It contains no wax or silicone.
Highly lubricating product, fast, clean cutting, and low dust emission.

Does not stain rubber or plastic parts. Residue is easily removed with water or a damp cloth.

INDICATION: Used with a wool cutting pad, whether normal, aggressive, or medium, it has a cutting function and promotes refining in most cases. For repainted parts, it removes 1,200-grit sandpaper marks or scratches of the same size, whether used with rotary or orbital polishers.

To facilitate polishing, refine the 1,200-grit sandpaper with 2,000-grit sandpaper, eliminating the need for refining with multiple sandpapers.

It can be used for Technical Polishing in Repainting, Commercial Aesthetics, and especially Detail Polishing.

INSTRUCTIONS FOR USE:

The surface must be clean, cool, and dry.

Use with a rotary or orbital polisher.

Strokes should be short and slow until all surface imperfections are completely removed.

Finish the process with a soft microfiber cloth.

Wait for the surface to cool before removing.

Rubbing the surface while it's still hot will leave marks.

Any excess can be easily removed with a microfiber cloth.

Size 500g