High performance polish, contains Synthetic Sealants and high-tech super-fine abrasives in a single product. Can be used on any type of automotive or nautical paint or varnish.

Water-based with direct emulsion, it dilutes easily in water, making it easy to clean pads.

Can be used with a wool pad to remove small marks.

Application with polishing machines and easy removal with a microfiber cloth. Protection lasts up to 24 washes with mild shampoo or six months.

Highly lubricating product, allowing the necessary time for safe and perfect work. Can be used with wool and foam pads.

Does not stain rubber or plastic parts. Residue is easily removed with water or a damp cloth.

Smooth and silky finish

Intense, clean, and deep shine

Application with a rotary or orbital polisher, using wool pads for refining or removing small marks, and foam pads for light cutting, refining/polishing, or polishing for finishing.

Choose the pad according to the paint's hardness and defects. Fast initial curing after the polished piece has cooled, wait 3 hours (to get wet) full curing in 72 hours (to wash).

In case of light scratches on the protective film, High Shine Fast can be reapplied with a machine, immediately restoring its original performance.

For high performance, apply 3 to 4 drops per piece. After the pad is fully loaded with product, replenish with a few drops as needed.

Used with a wool pad, it refines and removes light marks, while with a foam pad, it provides a polishing and final finish. It removes pad marks left by previous steps and light marks from washcloths.

The surface must be clean, decontaminated, cool, and dry. Use with a rotary or orbital polisher. Use short, slow strokes until all paint imperfections are completely removed. Finish the process with a soft microfiber cloth. Allow the surface to cool before removing. Rubbing the surface while it's still hot can cause marks. Any excess can be easily removed with a microfiber cloth.

Apply with short, slow movements to remove any problems and promote moderate heating of the paintwork, allowing the sealants to penetrate.

Wait for the entire car to cool down (20 minutes) and remove with a microfiber cloth.